• PS CB:
Valve Bowls Blended• PS MI:
Match Intake Port to COMETIC CO CIR149SPV059 F • PS Valve Job:
Competition Valve Job • Intake Valves:
2.180 x 5.540 o.a.l. – BR 60518D • Exhaust Valves:
1.600 x 5.540 o.a.l. – BR 60054 • Valve Springs:
1.550 Roller Valve Spring – PAC 1941,
255 lb Closed, 610 lb Open,
1.950 Installed Height,
.700 Maximum Lift • Retainers:
1.550 10° Steel – CC 752 1.550 10° Titanium – MA 2398BR • Valve Locks:
10° Jumbo – CC 611 • Valve Seals:
11/32 – US VS529V | • Torque Heads:
100 ft-lb with 1/2″ Studs
70 ft-lb with 7/16″ Studs• Torque Rocker Studs:
40-45 ft-lb • Intake Gaskets:
COMETIC CO CIR149SPV059 F • Head Gaskets:
4.180 – FEL-PRO 1134
4.200 – FEL-PRO 1135 • Exhaust Gaskets:
FEL-PRO 1427 (Trim to Fit) • Head Studs:
Available Exclusively From BRODIX –
BRODIX BR HS / HH F 302 • Accessory Bolt Holes Are Drilled: • Spark Plug Starting Points:
NGK R5671A-9
for Alcohol
NGK R5671A-8
for Racing Gas • Intake Valve Seats:
P 2.250 3/8 • Exhaust Valve Seats:
1.650 400 A45 • Intake and Exhaust Valve Guides:
SH 502 11/32 PL • Spring Pockets:
May Not be Cut Any Larger or
Deeper Than 1.625 • Valve Angle:
15° • Angle Milling:
.010 in Per cc • Flat Milling:
.0060 in Per cc • Rocker Arms:
Shaft System – T&D 7352 • Lifters:
.150 Offset • Valve Centerline:
53/165 • Intake Manifold:
EDELBROCK 2828 (9.500 Deck) |
