• PS CB:
Valve Bowls Blended• PS MI:
Match Intake Port to FP 1250 (BP LH F 17 195)
Match Intake Port to FP 1262 (BP LH F 17 210)• PS Valve Job:
Competition Valve Job • Intake Valves:
2.020 x 4.920 o.a.l. –
BR 6170DI (BP LH F 17 195)
2.080 x 4.965 o.a.l. –
BR 81019 (BP LH F 17 210) • Exhaust Valves:
1.600 x 4.920 o.a.l. –
BR 6169DI (BP LH F 17 195)
1.600 x 4.965 o.a.l. –
BR 81021 (BP LH F 17 210) • Valve Springs:
1.470 Roller Valve Spring – CC 987,
125 lb Closed, 325 lb Open,
1.860 Installed Height,
.575 Maximum Lift • Retainers:
1.430 7° Steel – CC 743 • Valve Locks:
7° – PI PF-555 • Rocker Studs:
7/16 – BR 716L, AR RRS-4I • Guide Plates:
5/16 – BR 289351 • Valve Seals:
11/32 – US VS529V | • Torque Heads:
100 ft-lb With 1/2″ Studs
70 ft-lb With 7/16″ Studs• Torque Rocker Studs:
40-45 ft-lb • Intake Gaskets:
FEL-PRO 1250 (BP LH F 17 195)
FEL-PRO 1262 (BP LH F 17 210) • Head Gaskets:
FEL-PRO 1011-1, or FEL-PRO 1011-2 • Exhaust Gaskets:
FEL-PRO 1487, BRODIX MG 1350 (Trim to Fit) • Head Bolts:
ARP 154-3605 FOR 289-302
ARP 154-3603 FOR 351 • Head Studs:
ARP 154-4005 FOR 289-302
ARP 154-4203 FOR 351 • Accessory Bolt Holes Are Drilled • Spark Plug Starting Points:
CHAMPION C63CX or AUTOLITE 3922 • Intake Valve Seats:
P 2.131 5/16 • Exhaust Valve Seats:
P 1.650 3/8 • Intake and Exhaust Valve Guides:
SH 502 11/32 P BH 545 11/32 3XPE • Spring Pockets:
May Not be Cut Any Larger or Deeper
Than 1.550 • Valve Angle:
17° • Angle Milling:
.010 in PER cc • Flat Milling:
.0060 in Per cc • Stud Girdle:
53/119 – BR 6430 –
Available Exclusively From BRODIX • Guide Plates:
5/16 – BR 289351 –
Available Exclusively From BRODIX • Rocker Arms:
FORD 7/16 Roller Rockers • Lifters:
Standard • Valve Centerline:
53/119 • Intake Manifold:
Small Block Ford |
