• PS CB:
Valve Bowls Blended• PS MI:
Match Intake Port to FP 1250 • PS Valve Job:
Competition Valve Job • Intake Valves:
1.940 x 4.920 o.a.l. – BR 60194D
2.020 x 4.920 o.a.l. – BR 6170DI • Exhaust Valves:
1.600 x 4.940 o.a.l. – BR 6169DI • Valve Springs:
1.470 Hydraulic Roller Valve Spring –
CC 987, 125 lb Closed, 325 lb open,
1.900 Installed Height
.575 Maximum Lift • Retainers:
1.430 7° Steel – CC 743 • Valve Locks:
7° – PI PF-555 • Rocker Studs:
7/16 – BR 716L, AR RRS-4I (ST 5.0 R) • Guide Plates:
5/16 – BR 289351 (ST 5.0 R) • Valve Seals:
11/32 – US VS529V | • Torque Heads:
100 ft-lb with 1/2″ Studs
70 ft-lb with 7/16″ Studs• Torque Rocker Stands:
30 ft-lb (ST 5.0) • Torque Rocker Studs:
40-45 ft-lb (ST 5.0 R, PB ST 5.0 R) • Intake Gaskets:
FEL-PRO 1250 • Head Gaskets:
FEL-PRO 1011-1 or
FEL-PRO 1011-2 • Head Studs:
ARP 154-4005 for 289-302,
ARP 154-4203 for 351 • Head Bolts:
ARP 154-3605 for 289-302;
ARP 154-3603 for 351 • Exhaust Gaskets:
FEL-PRO 1487, BRODIX MG 1350 • Accessory Bolt Holes Are Drilled • Spark Plug Starting Points:
CHAMPION C63CX or AUTOLITE 3922 • Intake Valve Seats:
P 2.131 5/16 F • Exhaust Valve Seats:
P 1.950 3/8 • Intake and Exhaust Valve Guides:
SH 545 11/32 P • Spring Pockets:
May Not be Cut Any Larger or
Deeper Than 1.550 • Valve Angle:
20° • Angle Milling:
Not Available • Flat Milling:
.0060 in Per cc • Pushrods:
Stock Length 6.250; May require
Special Length If Heads Are Milled • Rocker Arms:
Ford Stock 5.0 Standard Non-Adjustable Rockers
(MOTORSPORTS Part # M6564-B351) for ST 5.0
Any Ford Roller Rockers with
7/16″ Rocker Studs for ST 5.0 R • Stud Girdle:
53/119 – BR 6430 • Air Tube:
Stock Air Tube can be Used with Minor Modifications • Valve Centerline:
53/119 • Intake Manifold:
Small Block Ford |
