head-hunter big block

• A-356 Virgin Aluminum; Easily Repaired
• 100% CNC Ported
• 24° Valve Angle
• Redesigned Exhaust Ports
• Best Flowing Conventional Head Available

Description

The BRODIX Head Hunter series represents the cutting edge of conventional big block technology. These heads are 100% CNC ported and utilize features such as raised, oval-shaped intake ports that flow an amazing 489 cfm and up and newly designed exhaust ports that flow 335 cfm with only a 1.850 exhaust valve. The new HH X offers a redesigned rocker system for increased stability. Standard features include an extra thick deck, high valve cover rail, and the best castings in the business.

Photos
Details
Flow Chart
Easy Order Numbers
Instruction Sheet

2 thoughts on “Head Hunter™ Series/24°”

  1. I have been doing research on your heads and using them for many yrs.. I have a 540 cid BBC that is built for my twin 98mm precision turbos. I have a solid roller cam in it that is a custom ground .930 lift. I need to come up with a head for my setup so I can purchase my Pistons. I have a street driven 1988 Monte Carlo SS pumping 2500hp it’s going in and I don’t wanna loose power. I do drag week and run around at the drag strips I run EFI e85 fuel. Here is a idea of what I’m doing and have.

    1. Jason,

      If you want to try to hit your goal with a conventional head I would look into the BP BB-3 XTRA 380 fully cnc-ported 24° cylinder head. You may want to also look into fitting them with titanium intakes and Inconel exhaust.

      Thanks!

Comments are closed.