• PS CB:
  Valve Bowls Blended

• PS MI:
  Match Intake Port to BRODIX MG 2015
   (BP PB 1200, BP PB 1201, PB 1203)
  Match Intake Port to BRODIX MG 1202
    (BP PB 1202)

• PS Valve Job:
  Competition Valve Job

• Intake Valves:
  2.520 x 6.920 o.a.l. - 55° Seat Angle
    (BP PB 1200, PB 1203)
  2.450 x 6.920 o.a.l. - 55° Seat Angle
    (BP PB 1201)
  2.480 x 6.920 o.a.l. - 55° Seat Angle
    (BP PB 1202)

• Exhaust Valves:
  1.860 x 6.620 o.a.l. - 55° Seat Angle

• Valve Springs:
  1.645 Roller Valve Spring-CC 948,
    315 lb Closed, 915 lb Open,
    2.100 Installed Height,
    .850 Maximum Lift

• Retainers:
  1.645 10° Titanium - MA 2001

• Valve Locks:
  10° Jumbo - CC 611

• Rocker Studs:
  Shaft System Required

• Valve Seals:
  11/32 - US VS485V



Special Intake, Exhaust Gaskets, and Valve Cover Gaskets Are Available Exclusively From BRODIX

• Torque Heads:
  70 ft-lb

• Torque Rocker Studs:
  40-45 ft-lb

• Intake Gaskets:
  BRODIX MG 2015
    (BP PB 1200, BP PB 1201, PB 1203)
  BRODIX MG 1202
    (BP PB 1202)

• Head Gaskets:
  4.540 - FEL-PRO 1017, COMETIC C5433
  4.600 - FEL-PRO 1057, COMETIC C5434

• Exhaust Gaskets:
  BRODIX MG 2005

• Valve Cover Gaskets:
  BRODIX MG 2016

• Head Studs:
  Available Exclusively From BRODIX -
  BRODIX BR HS/PB 2005 CI BLK (12 pt)
    for Cast Iron Block
  BRODIX BR SK HS/PB 2005 (12 pt)
    for Aluminum Block

• Accessory Bolt Holes Are Drilled

• Spark Plug Starting Points:
  NGK R5671A-10
    for Alcohol
  NGK R5671A-9
    for Racing Gas

• Spring Pockets:
  May Not be Cut Any Larger
  or Deeper Than 1.750

• Valve Angle:
  12° And 4° Intake,
  6° And 4° Exhaust

• Angle Milling:
  Not Available

• Flat Milling:
  .0055 in Per cc

• Angle Machining:
  Not Available

• Dowel Shift:
  Not Available

• Pushrod Slots:
  Standard

• Rocker Arms:
  Shaft System - T&D 3070, JESEL KPS 390156

• Lifters:
  Standard

• Pistons:
  12° x 6° Valve Angle

• Pushrods:
  Check Pushrod Clearance with Head Installed on the
  Engine Block Before Final Assembly.