Aluminum Cylinder Head Options

All valve jobs are performed on a
Serdi valve seat machine.


PART#

PS MINOR PORTING (SMALL BLOCK)
COMPETITION RADIUSED VALVE JOB, INTAKE PORTS MATCHED AND TRANSITIONED 2” INTO RUNNER, CHAMBERS POLISHED AND WORKED TO SPECIFIC cc, ANGLE MILLED, BOWLS CLEANED, PROFILED AND POLISHED EXHAUST PORTS (COMPLETELY ASSEMBLED IF PARTS ARE PURCHASED OR PROVIDED)

PS MINOR PORTING (BIG BLOCK)
COMPETITION RADIUSED VALVE JOB, INTAKE PORTS MATCHED AND TRANSITIONED 2” INTO RUNNER, CHAMBERS POLISHED AND WORKED TO SPECIFIC cc, ANGLE MILLED, BOWLS CLEANED, PROFILED AND POLISHED EXHAUST PORTS (COMPLETELY ASSEMBLED IF PARTS ARE PURCHASED OR PROVIDED)

PS COMPLETE PORTING (SMALL BLOCK)
ABOVE MINOR PORTING PLUS FURTHER PORTING OF INTAKE AND EXHAUST RUNNERS, CHAMBERS COMPLETELY POLISHED WITH FLOW SHEET PROVIDED

PS COMPLETE PORTING (BIG BLOCK)
ABOVE MINOR PORTING PLUS FURTHER PORTING OF INTAKE AND EXHAUST RUNNERS, CHAMBERS COMPLETELY POLISHED WITH FLOW SHEET PROVIDED

PS VALVE JOB (SMALL OR BIG BLOCK)
COMPETITION RADIUSED VALVE JOB AND GUIDES HONED

SS ANGLE MACHINE (SMALL OR BIG BLOCK)
MILLED ON AN ANGLE BEFORE BOLT HOLES ARE DRILLED IN HEADS, INTAKE FLANGE ANGLE
CORRECTED TO MATCH

SS ANGLE MILL (SMALL OR BIG BLOCK)
MILLED AFTER BOLT HOLES ARE DRILLED, INTAKE FLANGE ANGLE CORRECTED TO MATCH,
HEAD BOLT HOLES SPOT FACED

SS MD INJ (SMALL BLOCK ONLY)
HOLES DRILLED FOR DOWN NOZZLE INJECTORS

SS STAHL (SMALL BLOCK ONLY)
STAHL EXHAUST PATTERN DRILLED ON A STANDARD OR SPREAD PORT EXHAUST FLANGE
(NOT AVAILABLE ON TRACK 1)

SS STEAM (SMALL BLOCK ONLY)
STEAM HOLES DRILLED IN HEADS FOR STREET USE ON 400 SMALL BLOCK

PS CSA (SMALL OR BIG BLOCK)
VALVES ANGLES ROUGH CUT INTO THE SEATS, SPECIFY VALVE SIZE, DIAMETER IS LEFT SMALL
(THIS IS NOT A VALVE JOB)

SS HT
HEAT TREATING ONLY, DOES NOT INCLUDE ANY FINISHED WORK

PS MI
MATCH INTAKE PORTS TO GASKET

PS MI M
MATCH INTAKE MANIFOLD TO HEADS

SS CC
CNC MACHINE PORT AND POLISH COMBUSTION CHAMBERS, ANGLE MILLING NOT INCLUDED

PS CC
HAND PORT AND POLISH COMBUSTION CHAMBERS, ANGLE MILLING NOT INCLUDED

PS CB
CLEAN VALVE BOWLS

SS CF
CORE FILING (CORE FILE SHEET MUST BE PROVIDED)

PS PKG WK
CLEAN BOWLS, MATCH INTAKE PORTS, AND VALVE JOB BARE HEADS

SS CUT REC GROOVES
MACHINE RECEIVER GROOVES IN HEADS

SS MACH 10 DEG DECK HOLES (BIG BLOCK)
MACHINE 10° DECK HOLES FOR EXTRA CLAMPING

SS HELI COIL EXH
HELICOIL EXHAUST

SS HARD ANODIZE
HARD ANODIZING FOR SALT WATER PROTECTION

SS POLISH SB
OUTSIDE POLISH OF SMALL BLOCK HEADS

SS POLISH BB
OUTSIDE POLISH OF BIG BLOCK HEADS

8 Comments

  1. Sammy t kelly says:

    I have a set of N style brodix heads and I am looking for a part number for a set headers. they fit a 351w any help will be appreciated thanks.

    • Brodix says:

      We don’t make header recommendations. We would recommend contacting a header manufacture and getting recommendations from them

      Thanks!

  2. Mike Wiggins says:

    Just asking. If I was to order a set of bb3xtra , cnc ported today. Approximately how long before they would be ready and received in miss

  3. Terry Gauvin says:

    Hello I have a 1969. Plymouth satellite 383 Mopar engine .with a mild cam ceramic header and 800cfm carburetor would like to put a set of performance heads. What you recommend.

    • Brodix says:

      Terry,

      Look into the STS B1 BS or the B1 BS. The STS B1 BS is a 100% CNC ported head and will have about a 120 hp gain over the stock cast iron. The B1 BS is a 90 hp increase over the stock cast iron head and is a out-of-the-box cylinder head. Some special components are required (rockers, head studs, and longer pushrods).

      Thanks!

  4. LEO RAMP says:

    I have a set of cylinder heads that I have been told are Brodix heads. Both heads have A063 stamped on the end. One head is marked G03383-1 and the other is marked G03359-1.
    The opposite end of the heads has A054 stamped.
    Are these Brodix Heads? My son bought these about 12 years ago and can’t remember the manufacturer. They have never been mounted.
    Any assistance you can provide will MOST appreciated.

    • Brodix says:

      Leo,

      I wan those numbers through our system and didn’t find anything. Would you please email us some photos at tech@brodix.com and we can hopefully identify them with photos.

      Thanks!